Top 10 common forklift accidents ， forklift operation should pay attention to these issues ！.
Top 10 common forklift accidents ， forklift operation should pay attention to these issues ！.
Blog Article
Don't undervalue the forklift at the workplace. If the operation is bad, there will be severe crashes in minutes, and there are many accidents involving forklifts.
Case 1: The forklift cargo blocked the driver's view, and the individual in front might not be found, leading to a moving accident.
Situation 2: In order to preserve the balance of the forklift when raising heavy products, the employees utilized their body weight as the counterweight, which almost caused casualties.
Instance 3: The width of the forklift cargo surpasses the allowable width of the route and holds on the roadside shelf, which virtually causes an accident.
Situation 4: Forklift is speeding up and surrender during a turn.
Situation 5: The forklift vehicle driver did not notice the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift lifts the employees unlawfully, the forklift vehicle driver does not wear the safety belt, the forklift lifter drops and the driver is crushed when the forklift rolls over.
Situation 7: The forklift driver did not wear a safety belt and dropped from the vehicle when it rolled over and was crushed.
Forklift operation ought to focus on these issues ：.
Beginning.
1. Prior to starting, observe the environments, and after verifying that there are no barriers that hinder the safety of driving, beep the horn initially and afterwards begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) gauge have to be risk-free before beginning.
3. When the forklift begins with a load, the chauffeur ought to initially validate that the tons is secure and reliable.
4. The start should be sluggish and constant.
Driving.
1. When driving, the elevation between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the pole ought to be slanted backwards. .
2. Do not lift the fork too expensive when driving. When entering and leaving the task website or while driving, take care that there will certainly be no challenges in the sky. When the lots is taking a trip, the fork should not be raised too high, which will affect the security of the forklift. .
3. After unloading, the fork ought to be decreased to the normal driving setting prior to driving. .
4. When turning, if there are pedestrians or cars nearby, the driving signal should be issued first. High-speed sharp turns are forbidden. High-speed doglegs will create the vehicle to lose side security and tip over. .
5. When the forklift is downhill, it is purely prohibited to switch off the flame and slide, and it is prohibited to brake suddenly while driving with lots unless there are special conditions.
6. When the forklift is running, it needs to follow the traffic rules in the factory and have to keep a certain safety and security distance from the car ahead. .
7. When the forklift is running, the tons needs to be in the lowest position that does not impede the driving, and the gantry should be appropriately slanted back. The lots will not be raised except when stacking or filling. .
8. The height of the load need to not obstruct the chauffeur's view. In special circumstances, when the product influences the forward vision, drive at a reduced rate when turning around.
9. It is prohibited to activate the ramp, neither to drive throughout the ramp. .
10. The secure driving speed of the forklift in the manufacturing facility location is 5 km/h, and it needs to drive securely at a reduced rate when going into the production workshop area. .
11. When the forklift is raised, lifted or driven, it is forbidden for employees to stand on the fork to hold products and play a stabilizing function. .
12. If problems are found, they will certainly be fixed and reported in a timely way, and they will never ever run with diseases or conceal them.
packing and unloading.
1. When fork-loading things, the range between both forks must be changed as needed to make the load of both forks well balanced and not manipulated, and one side of the product should be against the shelf. .
2. It is prohibited to deal with a single fork or utilize a fork top or draw. In special circumstances, safety and security indication must be established to advise bordering pedestrians. .
3. In the process of packing and unloading things, the forklift must be stopped with the brake. .
4. The speed of the vehicle need to be sluggish and stable. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled things and harm individuals. .
5. When utilizing a fork to fork the goods, the fork ought to be as deep as possible under the lots, and it should be kept in mind that the fork pointer ought to not touch other goods or items. The load must be maintained with very little back tilt of the gantry so that the tons does not slide in reverse. The mast can be slanted forward a little when the load is decreased to permit easy positioning of the load and extraction of the forks. .
6. It is restricted to fork goods at broadband and collide with hard items with the fork head. .
7. When the forklift is functioning, it is prohibited for individuals to stand around the fork, so as to prevent the collapse of the goods and injure people. .
8. Straining is banned, and it is restricted to utilize forks to raise personnel to participate in high-altitude operations to prevent high-altitude dropping crashes. .
9. It is not allowed to use the brake inertia to slip, put, round or roll items. .
10. It is not permitted to utilize forks to choose, transform pallet unload.
Leaving .
1. It is prohibited to leave the forklift when the products on the fork impend. Prior to leaving the forklift, you should discharge the goods or lower the fork framework.
2. Pull the parking brake manage to dead or depress the emergency brake button.
3. The engine is switched off and the power is removed. (Except for special scenarios, such as the motorist does not leave the automobile's line of vision and does not exceed 1 min).
4. Get rid of the secret. .
Forklift Operation Precautions.
1. Prior to Stand-on Electric Pallet Stacker and after the forklift operation, the look needs to be examined, and gas, lubricating oil and cooling water must be added.
2. Check the safety performance of starting, running and stopping.
3. Inspect whether the lights and horn signals are complete and effective.
4. Throughout the operation of the forklift, check whether the stress and temperature level are typical.
5. After the forklift is running, the external leak ought to also be checked and the seals must be replaced in time.
Forklift Safety Operation Specifications.
1. You need to inspect before leaving the vehicle;.
2. When you experience a person in front of you throughout driving, you need to send a Stand-on Electric Pallet Stacker signal at a distance of 5 m;.
3. The driving speed in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the cargo must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming must not be too sharp to stop the tendency of "free switching";.
6. Running up and down the incline ought to be slow-moving and uniform, and no activating the incline is permitted.
7. Do not drive across the slope. When the gradient is greater than 10%, the automobile needs to be driven in reverse when going downhill;.
8. When the forklift personnel lug the goods and move forward, if they come across huge or heavy goods and go to the chauffeur's line of vision, they need to take the turning around exercise
.
The "Eight Prohibitions" should be adhered to in the procedure.
1. Solitary fork procedure is not allowed.
2. It is not allowed to raise the goods for long distance driving.
3. It is not allowed to get the goods by passing on the pallet with the fork.
4. It is not enabled to directly shovel chemicals, flammables and other hazardous chemicals with forks.
5. It is not allowed to make use of inertia force to grab the goods.
6. It is not enabled to use braking pressure to expatriation round or easy-to-roll things.
7. It is not enabled to bring individuals to deal with the pallet or fork, and it is purely forbidden to stand under the fork after the fork is raised.
8. Do not drive laterally on slopes
.
Auto parking is not allowed under the following problems.
1. Curves, slim roadways, train crossings;.
2. Areas with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the contrary side of the section with the very same length as the obstacle should be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844